Hi,
Thank you for posting your query in Microsoft Community Forums.
Based on the issue description, I understand that you are unable to boot into desktop and you have start-up issues on Windows 7 computer.
I understand it must be frustrating, but rest assured, we are here to help you and guide you in the right direction.
Help me with more information.
1. Were there any hardware or software changes made on the computer prior to this issue?
2. Are you able to boot into safe mode?
3. Do you receive any error message/code?
To troubleshoot this start-up issue, I would suggest you to try the methods and check if it helps.
Method 1
Disconnect all the external devices (printers, scanner, USB (universal serial bus) drives, etc..) Except mouse and the keyboard and then boot up.
If this corrects the issue then add the devices back one at a time until you discover the piece of hardware causing the issue. Then update the driver software for the device.
Method 2
Try booting into Last Known Good Configuration and see if you can boot fine.
Using Last Known Good Configuration
Method 3
Boot the computer in safe mode and check whether the issue persists, if the issue does not persist then perform clean boot and check whether the issue resolves.
Step 1
Safe mode starts Windows with a limited set of files and drivers. Startup programs don't run in safe mode, and only the basic drivers needed to start Windows are installed. Please click on the mentioned link below.
Step 2
Put the computer in Clean Boot state to see if there is any software conflict as clean boot helps in eliminating software conflicts.
Note: After clean boot troubleshooting step, refer to âHow to reset the computer to start as usual after troubleshooting with clean bootâ from above article.
Method 4
If issue persists, I would suggest you to perform a startup repair using Windows 7 disk and check if it makes any difference.
Startup Repair: frequently asked questions
What are the system recovery options in Windows 7?
In addition, you can do a System Restore from Windows Recovery Consol.
Perform these methods and let us know the status. If you need further assistance, we will be glad to help you.
Back in 2006 when Windows Vista was introduced, it came with a brand new feature that is able to burn whatâs called a âSystem repair discâ onto a blank CD. While it isnât a disc full of utilities that can help you fix a huge number of issues such as the great Hirenâs Boot CD is able to do, there are number of functions built in that can do the basic tasks. These include helping a system with startup issues to boot, enabling you to run an offline system restore, a command prompt where you can use tools such as Diskpart, run the Windows memory diagnostic and restore a full system image backup if your installation is beyond repair.
Whatâs good about this tool is itâs available in all versions of Windows Vista, Windows 7 and also Windows 8. These same functions are also found on the Windows Install DVD that is used to install the operating system, so you donât necessarily need to have a repair CD if the install DVD is to hand. The problem with this though is if you own a branded computer or laptop such as Acer, Dell or HP, the chances are they only provided you with a recovery partition or a recovery DVD without the proper Windows DVD. In other words, you need to make your own system repair disc through Windows.
A simple scenario where a repair disc would be useful is if you decide for whatever reason that you want to install Windows XP as well as your current Windows. Itâs easy to install Windows XP on a system with Windows 7 or Vista installed, but XP would overwrite the current bootloader making only the XP installation bootable. The system repair disc would be able to reinstall the correct bootloader to make all operating systems bootable.
A few years back the people who make EasyBCD, Neosmart, used to host the Windows bootable repair CDâs although they now charge a fee for their own version of a repair disc. Most other repair discs made by Windows and uploaded to websites have just about all been taken down from the internet by Microsoft actively seeking their removal, for some reason. Hereâs how to create your own from within Windows.
Creating a Windows Vista Repair Boot CD
Although not immediately obvious in Windows Vista, it does come with the ability to create the repair CD which you can use to repair things like the boot sector, boot failure issues or various other problems. The odd thing about Vista is it appears the function to create the disc was removed in Service Pack 1 onwards. Although the program to create the CD is there, itâs unusable. What you need to do if you have Service Pack 1 or 2 installed is to use the original Recdisc.exe from the RTM version of Vista and replace the current file. Hereâs how to do it:
1. As noted above, you need the original Windows Vista RTM Recdisc.exe file to be able to use it with SP1 or SP2. You can download the correct version for your operating system architecture below:
Recdisc for Vista 32-bit | Recdisc for Vista 64-bit
Extract the downloaded zip file to your folder of choice.
2. Download Windows Se7en Files Replacer and extract the 7-Zip file to a folder.
3. If you have Windows UAC (User Account Control) turned off, simply run the Se7en Files Replacer.exe and drop the Recdisc.exe you downloaded from step #1 onto the window. This will replace the file in WindowsSystem32, thereâs no need to reboot.
If you have UAC on, run the tool and click the Manual button to the right. Then locate the executable from step #1, and locate the original in C:WindowsSystem32 from the next file dialog, although it should already be pointing to the correct folder. The reason you canât simply copy and paste the file is because Recdisc.exe has advanced permissions which prohibits it being replaced under normal circumstances.
4. If done correctly, you should now be able to run the repair disc creator. Go to Start or press the Win key and type recdisc. This will open the dialog where the CD/DVD drive can be selected, simply insert a blank disc and press the Create button.
Creating a Windows 7 Repair Boot CD
Thankfully, with Windows 7 itâs far easier to create the repair CD because you donât have to worry about replacing the Recdisc.exe file like is needed for Vista.
1. All you have to do is press Win or go to Start and type recdisc, then follow the prompts by selecting the optical drive with a blank CD and pressing the button.
If youâre one of those users that doesnât have a working CD/DVD-RW drive in your computer, itâs normally not possible to create the repair disc because Recdisc requires an optical drive to write to. We have discovered how you can create the ISO file and write a perfectly working repair disc onto USB without using a ROM drive. You can read all about that in our Installing Windows 7 System Recovery Disc onto USB Flash Drive article.
Creating a Windows 8 Repair Disc
Unfortunately, with Windows 8 Microsoft has gone back to playing around with the recovery disc feature like they did in Windows Vista. As it stands, Recdisc is available in Windows 8 but NOT in Windows 8.1. All is not lost though because you still get the new to Windows 8 feature of writing the repair disc directly to USB flash drive.
Using Recdisc in Windows 8
1. The procedure for Recdisc in Windows 8 is the same as Windows 7 and Vista, Press Win key+R to bring up the Run dialog and type recdisc.
Using the USB Recovery Creator in Windows 8/8.1
As mentioned, only this function is available in Windows 8.1 and not Recdisc above. To use it:
1. Either press Win key+R and type recoverydrive or go to Control Panel -> Recovery -> âCreate a recovery driveâ.
2. At the first window, make sure the tick is not in the âCopy the recovery partition from the PC to the recovery driveâ box. Then make sure the flash drive is inserted and press Next.
3. In this window MAKE SURE your USB device has been detected and is the selected drive to write onto. If your flash drive doesnât show up, it could default to the C: drive as the device to overwrite so special attention is needed here.
Windows 7 Home Premium Troubleshooting
4. Press Next when youâre satisfied, then read the final warning and click Create. After a short while the USB recovery drive will be created.
The Windows 8 recovery image is now 200MB+ compared to around 160MB for the Windows image that gets written to CD, but still easily fits on even small flash drives.
You might also like:How To Perform a Repair Install of Windows XPInstalling Windows 7 System Recovery Disc onto USB Flash DriveInstall Windows 7 and Vista MUI Language Packs on Basic, Home Premium, Business or ProHow To Burn Downloaded Windows Vista to DVD or USBvLite is a Windows Vista Configuration Tool that creates Vista Lite
I have the same problem as Tim, Michael and Corina. Recdisc.exe asks for the windows disk. If you posted a reply, I cannot find it. I have software which only will run on an old Vista PC. It will not boot half the time and wants to go to startup repair. Like Tim, Michael and Corina, I need help for my old PC.
Reply
ricki10 months ago
I created system repair disc (6 discs total) few years ago. Now my hard drive FAILED (bad sector). How can i restore my Vista to a new hard drive using these system repair discs? Can somebody please give me a step by step procedure from BOOT? my technical level is LOW :) thanks a lot in advance.
Reply
Sounds great. But during the create disc process it asks for my install diskâ¦which I thought was the point of this article: not having an install disk. Iâm just planning to move to an SSD and understand I need the recovery disk to do the boot repair on the clone. Thatâs all I need. Thanks.
Reply
Mark Kindred3 years ago
Thank you very much â great blogs.
Reply
My pc on window 8 instal but now it is automatic repair mode i have not window 8 diskplz tell me how can repair it
Reply
Michael4 years ago
I was able to follow the instructions and install recdisc on a 32-bit Vista computer using the Manual option. I verified that the version of recdisc on my computer is the version I installed today. However, when I run recdisc I get the following error message: Reply
âThe selected disc cannot be used. The disc which you selected does not contain a valid Windows installation. Do you want to try a different disc?â When I hit the âNoâ button, I get the message: âUnable to create a recovery disc. A recovery disc cannot be created without the Windows installation disc.â Any suggestions?
In Vista using the instructions for UAC on, it says the file location does not contain the file selected to be replaced. Reply
Only shows folders no programs. The old Recdisc.exe is visible using Win Explorer but not in Se7en.
Corina4 years ago
Hi Raymond, thanks for the information. However, on Windows Vista, recdisc asks to insert the Windows installation drive (after Create disc). Is it something Iâve done wrong, or is this version of Vista (Home Premium, SP2)?
Reply
thank you. Easy to use n done!!
Reply
kitty5 years ago
Hi Raymond, Reply
Would you please help me in the following matter! I run windows Vista Basic Home x32bit on an Acer Aspire. After I ran CCleaner, I cannot boot the system, message âAn error occured while attempting to read the boot configuration data. File:BootBCD. Status: Oxc000000fâ. I downloaded an iso file with vista, but the only option I got through Acer Recovery is to install Vista from scratch. I do not want to lose all my files!!! But Acer does not have an option to âRepair your computerâ only to âInstall Windowsâ. What should I do? I lost many nights trying to fix it! Please, please help!
I have a Acer aspire v3-731 win 8 donât know if win 8.1 Reply
My daughter put a login password on it and has forgot what it is!!!!! I can get to other bios settings and change the boot sequence but I donât have a recovery flash drive. I have spotmau and hirens disc but to no avail I canât get the laptop to boot from the disc. Iâm ready to throw this laptop in the poolâ¦. Any suggestionsâ¦.
Ombongi5 years ago
Quite informative. thank you
Reply
Thanks Raymond, it worked great! Ssh_exchange_identification: read: connection reset by peer.
Reply
ghost12 years ago
thanks Raymond for this good informative blog!!
Reply
Windows 7 Home Premium DownloadLeave a Reply
Every operating system needs an occasional repair job, and Windows 7 is no exception. Whether the source of the problem is corrupt data, a particularly brutal piece of malware, or some other serious issue, youâll occasionally have to reinstall your copy of Windows.
Wiping your hard drive and performing a fresh installation can be a huge headache; but fortunately thereâs a way to repair a corrupt Windows 7 installation while keeping all your programs, personal data, and user accounts intact. With Windows 7 you can perform an in-place upgrade installation to repair a flaky existing install. Though technically designed to upgrade older Windows operating systems like Vista, the in-place upgrade installation option can also be used to repair an existing installation of Windows 7.
Note that you must perform the in-place upgrade process from within Windows; if your PC canât fully boot to the Windows desktop, this repair guide is not for you. A few other limitations come up later in the article, so be sure to read the entire guide thoroughly before attempting to repair your corrupt copy of Windows 7. Performing a repair installation should be your last resort, and you should consider it only if you have already removed spyware from your PC, reinstalled your drivers, and unsuccessfully tried to restore from an earlier (working) version of Windows 7 using System Restore.
Prepare Your PC for Windows 7
Before performing a repair installation, you should take a few precautionary measures to ensure that the process goes smoothly. The first step is to back up all of your critical files to an external storage device. Though the repair process is unlikely to fail or to render any of your files unrecoverable, itâs always a smart idea to back up your data.
After youâve backed up your systemâs important data, we recommend uninstalling any third-party security software such as firewalls or antivirus applications. You can always reinstall them after completing the repair process; but since youâll be initiating this process from within Windows, you need to remove any security applications that actively scan files. You should also download and store all of the drivers that your system needs to functionâespecially the network controller, which tells your network adapter how to access the Internet.
After backing up all of your drivers, clean out all of the temporary files and junk data that have accumulated in Windows 7 over the course of prolonged use. To do this, click the Start button, and in the Search field type Folder Options; then press Enter. In the Folder Options window, click the View tab and select Show hidden files, folders and drives; then click OK.
Windows 7 Home Premium Torrent
Next, initiate a Disk Cleanup by opening the Start menu and selecting Computer; right-click your primary drive (the C: drive by default) and open the Properties menu. Select the Disk Cleanup utility in the lower-right portion of the menu, and select Clean up system files. The Disk Cleanup utility should take a few moments to rescan the drive. Next, click the More Options tab, and select Clean Up in the âSystem Restore and Shadow Copiesâ section at the bottom of the menu. In the dialog box that appears, click the Delete button; then navigate back to the Disk Cleanup tab, confirm that all items in the Files to Delete list are checked, and click OK. The Disk Cleanup utility should clear out outdated system files, temporary data, and other digital detritus. Depending on how much junk data is on your drive, this step may take anywhere from a few seconds to a few minutes.
After running the Disk Cleanup utility, you should clean out a few folders manually. Open the C: drive again, and double-click the Windows folder. Scroll down the list of folders and delete any files in the Prefetch and Temp folders. Be sure to delete only files within those two folders and not the folders themselves. Next, navigate back to the C: drive, and double-click the Users folder. Within the Users folder, double-click first the folder for your particular username, and then the AppData folder (if you donât see the AppData folder, you must not have selected âShow hidden files, folders and drivesâ earlier), the Local folder, and finally the Temp folder. Delete all of the files in this Temp folder as well; then restart your system.
Clicking on the Download Now (Visit Site) button above will open a connection to a third-party site. Download.com cannot completely ensure the security of the software hosted on third-party sites.
From Microsoft:
Windows 7 is the updated version of the Vista operating system from Microsoft.
Windows 7 Home Premium makes it easy to create a home network and share all of your favorite photos, videos, and music. And you can watch shows for free when and where you want with Internet TV on Windows Media Center. Get the best entertainment experience with Windows 7 Home Premium. This product includes both 32- and 64-bit versions, and 90 days of Microsoft Support Services included. Microsoft Windows 7 Home Premium is purchase-only software and can be bought and downloaded online or shipped via mail. What do you need to know about free software?Comments are closed.
|
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |